The Eggenberg Industrial inox disc is the perfect entry-level disc for machining stainless steel. Thanks to the specially developed flexible linen, this disc achieves high efficiency immediately and even at lower pressures. In combination with the high-quality 100% zirconium grain, the Industrial inox disc ensures the best efficiency at low pressures and less powerful 750-watt machines. In our zirconia line, this TOP disc is a disc with an excellent quality-price ratio that can sand all materials, only this disc takes off better and stays aggressive longer than our Eggenberg ECO line.

Flap disc 125 mm suitable for stainless steel. The Eggenberg flap disc Zirconium from the TOP-line is a grinding disc developed for stainless steel applications, but could also be used for steel. The flap disc has a diameter of 125 mm and an inner diameter of 22.23 mm. The conical Eggenberg zirconium flap disc has been specially developed for stainless steel applications. The grain of the flap disc consists of Zirconium, which is a mixture of aluminium oxide and zirconium oxide. This mixture has a particularly high corrosion-resistant property and gives the abrasive effect to the flap disc.

The Flap Disc is ideally suited for sanding away welds and fine finishing workpieces by choosing from the various grit coarsenesses. The TOP-line flap disc is available in 125 mm in grits P40, P60 and P80. The abrasive performance of the flap disc has increased, making it very competitive against all well-known European brands.

• Perfect quality wheel for steel/inox
• Excellent performance-price ratio
• Best efficiency with normal pressure and angle grinders tm 1500 watts

Technical specifications

• Model - TOP-line
• Diameter - 125 mm
• Intake - 22.23 mm
• Suitable for - stainless steel/steel
• Grit - 40/60/80

Scope of delivery

• Eggenberg TOP Flap Disc Conical Zirconium 125mm INOX/Steel - K40/60/80

Het bericht Eggenberg TOP Lamellenschijf Conisch Zirkonium 125mm INOX/Staal – K40/60/80 verscheen eerst op Globe Europe.

The Eggenberg Industrial inox disc is the perfect entry-level disc for machining stainless steel. Thanks to the specially developed flexible linen, this disc achieves high efficiency immediately and even at lower pressures. In combination with the high-quality 100% zirconium grain, the Industrial inox disc ensures the best efficiency at low pressures and less powerful 750-watt machines. In our zirconia line, this ECO disc is an excellent value for money disc that can sand all materials. The Eggenberg TOP line on the other hand, stays aggressive longer and takes off a bit better!

Flap disc 125 mm suitable for stainless steel. The Eggenberg flap disc Zirconium from the ECO-line is a grinding disc developed for stainless steel applications, but could also be used for steel. The flap disc has a diameter of 125 mm and an inner diameter of 22.23 mm. The conical Eggenberg zirconium flap disc has been specially developed for stainless steel applications. The grain of the flap disc consists of Zirconium, which is a mixture of aluminium oxide and zirconium oxide. This mixture has a particularly high corrosion-resistant property and gives the abrasive effect to the flap disc.

The flap disc is ideal for sanding away welds and fine finishing workpieces by choosing from different grit coarsenesses. The ECO-line flap disc is available in 125 mm in grits P40, P60 and P80. The abrasive performance of the flap disc has increased, making it very competitive against all well-known European brands.

• Perfect universal entry disc for steel/inox
• Excellent price-performance ratio
• Best performance with low-pressure and angle grinders up to 1100 watts

Technical specifications

• Model - ECO-line
• Diameter - 125 mm
• Intake - 22.23 mm
• Suitable for - stainless steel/steel
• Grit - 40/60/80

Scope of delivery

• Eggenberg ECO Flap Disc Conical Zirconia 125mm INOX/Steel - K40/60/80

Het bericht Eggenberg ECO Lamellenschijf Conisch Zirkonium 125mm INOX/Staal – K40/60/80 verscheen eerst op Globe Europe.

The Eggenberg Industrial inox disc is the perfect entry-level disc for machining stainless steel. Thanks to the specially developed flexible linen, this disc achieves high efficiency immediately and even at lower pressures. In combination with the high-quality 100% zirconium grain, the Industrial inox disc ensures the best efficiency at low pressures and less powerful 750-watt machines. In our zirconia line, this TOP disc is a disc with an excellent quality-price ratio that can sand all materials, only this disc takes off better and stays aggressive longer than our Eggenberg ECO line.

Flap disc 125 mm suitable for stainless steel. The Eggenberg flap disc Zirconium from the TOP-line is a grinding disc developed for stainless steel applications, but could also be used for steel. The flap disc has a diameter of 125 mm and an inner diameter of 22.23 mm. The flat Eggenberg zirconium flap disc has been specially developed for stainless steel applications. The grain of the flap disc consists of Zirconium, which is a mixture of aluminium oxide and zirconium oxide. This mixture has a particularly high corrosion-resistant property and gives the abrasive effect to the flap disc.

The Flap Disc is ideally suited for sanding away welds and fine finishing workpieces by choosing from the various grit coarsenesses. The TOP-line flap disc is available in 125 mm in grits P40, P60 and P80. The abrasive performance of the flap disc has increased, making it very competitive against all well-known European brands.

• Perfect quality wheel for steel/inox
• Excellent performance-price ratio
• Best efficiency with normal pressure and angle grinders tm 1500 watts

Technical specifications

• Model - TOP-line
• Diameter - 125 mm
• Intake - 22.23 mm
• Suitable for - stainless steel/steel
• Grit - 40/60/80

Scope of delivery

• Eggenberg TOP Flap disc Flat Zirconium 125mm INOX/Steel - K40/60/80

Het bericht Eggenberg TOP Lamellenschijf Vlak Zirkonium 125mm INOX/Staal – K40/60/80 verscheen eerst op Globe Europe.

The Eggenberg Industrial inox disc is the perfect entry-level disc for machining stainless steel. Thanks to the specially developed flexible linen, this disc achieves high efficiency immediately and even at lower pressures. Combined with the high-quality 100% zirconium grit, the Industrial inox disc ensures the best efficiency at low pressures and less powerful 750-watt machines.

In our ceramic line, this CER disc is an excellent value-for-money disc that can sand all materials, but particularly on stainless steel and aluminium better than our Eggenberg ECO and TOP line, because the ceramic grain is designed to have better heat conduction on stainless steel. Therefore a longer tool life and on Alumium it is less likely to clog up, which also extends the tool life/lifetime.

The flap disc is ideally suited for sanding away welds and fine finishing workpieces by choosing from the various grit coarsenesses. The CER-line flap disc is available in 125 mm in grits P40, P60 and P80. The abrasive performance of the flap disc has increased, making it very competitive against all well-known European brands.

• Perfect durable disc for stainless steel/aluminium
• Excellent quality-price ratio
• Best efficiency with normal pressure and angle grinders from 1100 watts

Technical specifications

• Model - CER-line
• Diameter - 125 mm
• Intake - 22.23 mm
• Suitable for - stainless steel & aluminium
• Grit - 40/60/80

Scope of delivery

• Eggenberg CER Flap Disc Flat Ceramic 125mm INOX/Alu - K40/60/80

Het bericht Eggenberg CER Lamellenschijf Vlak Ceramisch 125mm INOX/Alu – K40/60/80 verscheen eerst op Globe Europe.

This type of disc has all the advantages of the HT discs with a fibreglass backing (regular and complete dust abrasion, higher removal speed, constant removal over the life of the disc), but this disc is stiffer than a fibreglass disc. This type of disc should be used with a powerful machine (at least 1000w) to use its full capacity.

Het bericht Globe G2824 Lamellenschijf Vlak 125×22,2mm – 20 stuks verscheen eerst op Globe Europe.

Globe has a wide range of flap discs. Thanks to the fibreglass backing, the work is not contaminated as is the case with nylon-backed discs. The special aluminium zirconium compounds are suitable for deburring and finishing all types of steel (including alloys). Globe discs are tested to European standards and regulations with the highest possible safety standard at the forefront (EN13743).

The quality of the materials is of a high standard. They wear evenly and will deliver good results over their entire lifespan. The structure of the slats is available in HT (narrow) arrangement and in traditional arrangement with wide slats. The blades are placed with great care so that the disc is perfectly round, vibration-free and does not overheat, for optimum working comfort. For special applications, the flap discs are available in a smaller diameter backing, while the fins are longer to provide more softness and elasticity.

The metal bushing in the eye of the disc provides more resistance on the clamping nut and more safety.

Features Globe G2825C Flap Disc Conical 125 x 22.2mm 20 pieces

• Disc perfectly round and vibration-free and not overheated
• Thanks to the fibreglass backing, the work is not contaminated as is the case with nylon-backed discs
• They wear evenly and will deliver good results over their lifetime

Technical specifications

• Application - stainless steel
• Size - 125 Diameter
• Intake - 22.2 mm
• Type - Conical
• Packaging unit - 20 pieces

Scope of delivery

• Globe G2825C Flap disc Conical 125 x 22.2mm 20 pieces

Het bericht Globe G2825C Lamellenschijf Conisch 125×22,2mm 20 stuks verscheen eerst op Globe Europe.

The Eggenberg Industrial inox disc is the perfect entry-level disc for machining stainless steel. Thanks to the specially developed flexible linen, this disc achieves high efficiency immediately and even at lower pressures. Combined with the high-quality 100% zirconium grit, the Industrial inox disc ensures the best efficiency at low pressures and less powerful 750-watt machines.

In our ceramic line, this CER disc is an excellent value-for-money disc that can sand all materials, but particularly on stainless steel and aluminium better than our Eggenberg ECO and TOP line, because the ceramic grain is designed to have better heat conduction on stainless steel. Therefore a longer tool life and on Alumium it is less likely to clog up, which also extends the tool life/lifetime.

The Flap Disc is ideally suited for sanding away welds and fine finishing workpieces by choosing from the various grit coarsenesses. The TOP-line flap disc is available in 125 mm in grits P40, P60 and P80. The abrasive performance of the flap disc has increased, making it very competitive against all well-known European brands.

• Perfect durable disc for stainless steel/aluminium
• Excellent quality-price ratio
• Best efficiency with normal pressure and angle grinders from 1100 watts

Technical specifications

• Model - CER-line
• Diameter - 125 mm
• Intake - 22.23 mm
• Suitable for - stainless steel & aluminium
• Grit - 40/60/80

Scope of delivery

• Eggenberg CER Flap Disc Conical Ceramic 125mm INOX/Alu - K40/60/80

Het bericht Eggenberg CER Lamellenschijf Conisch Ceramisch 125mm INOX/Alu – K40/60/80 verscheen eerst op Globe Europe.

The Eggenberg Industrial inox disc is the perfect entry-level disc for machining stainless steel. Thanks to the specially developed flexible linen, this disc achieves high efficiency immediately and even at lower pressures. In combination with the high-quality 100% zirconium grain, the Industrial inox disc ensures the best efficiency at low pressures and less powerful 750-watt machines. In our zirconia line, this ECO disc is an excellent value for money disc that can sand all materials. The Eggenberg TOP line on the other hand, stays aggressive longer and takes off a bit better!

Flap disc 125 mm suitable for stainless steel. The Eggenberg flap disc Zirconium from the ECO-line is a grinding disc developed for stainless steel applications, but could also be used for steel. The flap disc has a diameter of 125 mm and an inner diameter of 22.23 mm. The flat Eggenberg zirconium flap disc has been specially developed for stainless steel applications. The grain of the flap disc consists of Zirconium, which is a mixture of aluminium oxide and zirconium oxide. This mixture has a particularly high corrosion-resistant property and gives the abrasive effect to the flap disc.

The flap disc is ideal for sanding away welds and fine finishing workpieces by choosing from different grit coarsenesses. The ECO-line flap disc is available in 125 mm in grits P40, P60 and P80. The abrasive performance of the flap disc has increased, making it very competitive against all well-known European brands.

• Perfect universal entry disc for steel/inox
• Excellent price-performance ratio
• Best performance with low-pressure and angle grinders up to 1100 watts

Technical specifications

• Model - ECO-line
• Diameter - 125 mm
• Intake - 22.23 mm
• Suitable for - stainless steel/steel
• Grit - 40/60/80

Scope of delivery

• Eggenberg ECO Flap Disc Flat Zirconium 125mm INOX/Steel - K40/60/80

Het bericht Eggenberg ECO Lamellenschijf Vlak Zirkonium 125mm INOX/Staal – K40/60/80 verscheen eerst op Globe Europe.

These discs are better suited to less powerful machines. Because the blades have different hardnesses, you generate an efficient and constant supply of abrasive grains with less curvature.

Globe has a wide range of flap discs. Thanks to the fibreglass backing, the work is not contaminated as is the case with nylon-backed discs. The special aluminium zirconium compounds are suitable for deburring and finishing all types of steel (including alloys). Globe discs are tested to European standards and regulations with the highest possible safety standard at the forefront (EN13743).

The quality of the materials is of a high standard. They wear evenly and will deliver good results over their entire lifespan. The structure of the slats is available in HT (narrow) arrangement and in traditional arrangement with wide slats. The blades are placed with great care so that the disc is perfectly round, vibration-free and does not overheat, for optimum working comfort. For special applications, the flap discs are available in a smaller diameter backing, while the fins are longer to provide more softness and elasticity.

The metal bushing in the eye of the disc provides more resistance on the clamping nut and more safety.

Features Globe G2822 Flap Disc Flat 125×22.2mm 20 pieces

• High removal capacity
• Lasts a long time
• Ideal for working with stainless steel

Technical specifications

• Application - steel and stainless steel
• Dimensions - 125 diameter
• Intake - 22.2mm
• Type - Flat
• Pack quantity - 20 Pieces

Scope of delivery

• Globe G2822 Flap disc Flat 125×22.2mm 20 pieces

Het bericht Globe G2822 Lamellenschijf Vlak 125×22,2mm 20 stuks verscheen eerst op Globe Europe.

Globe has a wide range of flap discs. Thanks to the fibreglass backing, the work is not contaminated as is the case with nylon-backed discs. The special aluminium zirconium compounds are suitable for deburring and finishing all types of steel (including alloys). Globe discs are tested to European standards and regulations with the highest possible safety standard at the forefront (EN13743).

The quality of the materials is of a high standard. They wear evenly and will deliver good results over their entire lifespan. The structure of the slats is available in HT (narrow) arrangement and in traditional arrangement with wide slats. The blades are placed with great care so that the disc is perfectly round, vibration-free and does not overheat, for optimum working comfort. For special applications, the flap discs are available in a smaller diameter backing, while the fins are longer to provide more softness and elasticity.

The metal bushing in the eye of the disc provides more resistance on the clamping nut and more safety.

Features Globe G2824C Flap Disc Conical 125 x 22.2mm 20 pieces

• Disc perfectly round and vibration-free and not overheated
• Thanks to the fibreglass backing, the work is not contaminated as is the case with nylon-backed discs
• They wear evenly and will deliver good results over their lifetime

Technical specifications

• Application - stainless steel
• Size - 125 Diameter
• Intake - 22.2 mm
• Type - Conical
• Packaging unit - 20 pieces

Scope of delivery

• Globe G2824C Flap disc Conical 125 x 22.2mm 20 pieces

Het bericht Globe G2824C Lamellenschijf Conisch 125 x 22,2mm 20 stuks verscheen eerst op Globe Europe.