• For unalloyed steel
• Suitable for general use
• The 6013 is a clad welding electrode for general steel structures
• Can be welded in all positions
• Also suitable for vertical and downward positions.

These PATON ANO 36 elite welding electrodes are designed for manual arc welding. The covered electrodes can be used for welding carbon steel structures with carbon content up to 0.25%. According to National Standard 1050- (05kp, 08kp, 08ps, 10pc, 10, 15kp, 15ps, 20kp 20ps, 20) on a short or medium arc in all spatial positions except vertical from top to bottom for PATON ANO 36 electrodes with a diameter of 5 mm.

The electrodes should be stored in a dry room at a temperature of not less than 15°С and a relative humidity of not more than 80%, if the moisture content in the coating exceeds 0.9% of the electrode, and annealed at 110 ± 10° C for 30 minutes before welding. They are not sensitive to the quality of prepared edges, availability of galvanic coatings, rust and other surface contaminants.

PATON ANO 36 elite welding electrodes are characterised by light ignition and re-ignition, stable arc burning, low loss of metal by sputtering, proportional seam of coating, good formation of seam metal, light separability of solidified slag. It allows very low current welding. The manufacturer guarantees that the electrodes meet the requirements of normative documentation. For this it is essential that the conditions of transport, storage and use are observed by the user.

The electrodes contain no harmful substances in the coating. Metal-coated electrode - Cover type - rutile-cellulose.

Advantages

• Using the latest formulas designed together with the specialists of E.O. Paton Electric Welding Institute of the National Academy of Sciences of Ukraine;
• High mechanical properties of the weld ;
• Good slag separation ;
• Comfortable welding process-easy primary and secondary striking, stable arc formation ;
• Increased welder health safety by reducing harmful emissions ;
• High degree of interaction with metals ;
• High performance;
• A wide range allows you to choose the most suitable electrodes for a specific task.

Technical specifications

• Classification
  • ISO 2560-A - E43 3 RC11
  • EN ISO 499 - E42 0 RС11
  • AWS A5.1 - E 6013
• Welding positions - PA, PB, PC, PD, PE, PF
• Chemical composition of the alloy - С ≤ 0.11 S ≤ 0.030 Si ≤0.10 - 0.35 P ≤ 0.035 Mn 0.40-0.65
• Mechanical properties
  
• Yield strength ≥450 N/mm²
  
• Relative elongation ≥ 22%,
  
• Impact resistance ≥ 78 J/cm².
• Welding current - 70 - 110 A
• Number of electrodes in the package - 57 pieces

Scope of delivery

• Paton ANO 36 ELITE welding electrode Ø2.5mm

Het bericht Paton E6013 ANO 36 ELITE Rutiel Laselektrode Ø2.5mm verscheen eerst op Globe Europe.

Use and functions

• Low-carbon electrode with jacket of rutile. Suitable for welding food tanks, acid, gas, steam and water fittings, stainless steel and other corrosion-resistant materials in the food and chemical industries, among others
• Resistant to corrosion and cracking up to +350 °C
• Welding electrode re-dry at a temperature of: 120-200ºC for 2 hours
• Good welding characteristics, suitable for AC or DC welding

Weldable material classes

• DIN; X2CrNi19-11, X5CrNi18-10, X6CrNiTi18-10, X6CrNib18-10, X2CrNiN18-10, X10CrNiNb18-10, X12CrNi18-8
• AISI; 302, 304, 304L, 304LN, 321, 347

Technical specifications

Standards

Chemical composition of welding wire %

Mechanical properties

Current type

• AC
• Direct current(+)

Scope of delivery

• Per sturdy plastic tube
• Incl. certificates

Het bericht GeKa ELOX R 308L Laselektrode 3,2×350 mm – 4,5 Kg per koker verscheen eerst op Globe Europe.

• For unalloyed steel
• Suitable for general use
• The 6013 is a clad welding electrode for general steel structures
• Can be welded in all positions
• Also suitable for vertical and downward positions.

These welding electrodes 6013 ELITE PATON ANO 21 are intended for manual arc welding. They are adapted for welding carbon steel structures with carbon content up to 0.25%. According to state standard 1050-88 (05kp, 08kp, 08ps, 10kp, 10pc, 15kp, 15ps, 15, 20kp 20ps, 20) on a short or medium arc in all spatial positions. A 5 mm diameter electrode is not recommended to be welded in a vertical position from top to bottom. Welding electrode 6013 ELITE PATON ANO 21 ensures easy arc ignition. They also guarantee good seam formation and easy slag crust separation.

These welding electrodes are recommended for arc welding of butt, lap or critical metal structures, water pipes and low-pressure gas pipes. The manufacturer guarantees that the electrodes meet the requirements of the normative documentation. For this, it is essential that the conditions of transport, storage and use are observed by the user.

Welding conduct direct current any polarity (recommended return "-") on the electrode or varying current from the transformer circuit voltage of at least 50 V. Electrodes should be stored in dry rooms at a temperature not lower than +15 ºС and a relative humidity of not more than 80%. If the moisture content in the coating exceeds 0.9%, it glows at 120 ± 10 °C for 40 minutes.

The electrodes contain no harmful substances in the coating. Metal-coated electrode - Type of coating - rutile.

Advantages

• Using the latest formulas designed together with the specialists of E.O. Paton Electric Welding Institute of the National Academy of Sciences of Ukraine;
• High mechanical properties of the weld ;
• Good slag separation ;
• Comfortable welding process-easy primary and secondary striking, stable arc formation ;
• Increased welder health safety by reducing harmful emissions ;
• High degree of interaction with metals ;
• High performance;
• A wide range allows you to choose the most suitable electrodes for a specific task.

Technical specifications

• Classification
  • EN ISO 2560-А: Е43 2 RС11
  • EN ISO 499: E38 2 R11
  • AWS A5.1: E 6013
• Welding positions
  • PA, PB, PC, PD, PE, PF
• Chemical composition of the alloy - С ≤ 0.10 S ≤ 0.040 Si ≤ 0.30 P ≤ 0.045 Mn 0.50-0.80
• Mechanical properties
  
  • Yield strength - ≥450 N/mm²
    
  • Relative elongation - ≥ 18%,
    
  • Impact resistance - ≥ 78 J/cm².
• Welding current - 90 - 140 A
• Number of electrodes in the package - 35 pieces

Scope of delivery

• Paton E6013 ANO 21 ELITE Rutile Electrodes Ø3.2mm

Het bericht Paton E6013 ANO 21 ELITE Rutiel Elektroden Ø3.2mm verscheen eerst op Globe Europe.

Use and functions

• Suitable for welding tanks, pipes and equipment made of Cr-Ni-Mo low-carbon steels used in the food, textile, chemical and paint industries
• Resistant to acid and corrosion up to 400°C
• Required re-drying time 2 hours at 300°C
• Good welding characteristics, suitable for AC or DC welding

Weldable material classes

• EN: X2CrNiMo17-12-2, X2CrNiMo18-14-3, X3CrNiMo17-13-3, X5CrNiMo17-12-2, X6CrNiMoTi17-12-2, X6CrNiMoNb17-12-2, X10CrNiMoNb18-12, G-X2CrNiMo19-11-2
• AISI: 316L, 316Ti, 316Cb

Technical specifications

Standards

Chemical composition of welding wire %

Mechanical properties

Current type

• AC
• Direct current(+)

Scope of delivery

• Per sturdy plastic tube
• Incl. certificates

Certificate

ELOX R 316L - 2.5×250 mm

Het bericht GeKa ELOX R 316L Laselektrode 2,5×250 mm – 3 Kg per koker verscheen eerst op Globe Europe.

Use and functions

• Suitable for welding tanks, pipes and equipment made of Cr-Ni-Mo low-carbon steels used in the food, textile, chemical and paint industries
• Resistant to acid and corrosion up to 400°C
• Required re-drying time 2 hours at 300°C
• Good welding characteristics, suitable for AC or DC welding

Weldable material classes

• EN: X2CrNiMo17-12-2, X2CrNiMo18-14-3, X3CrNiMo17-13-3, X5CrNiMo17-12-2, X6CrNiMoTi17-12-2, X6CrNiMoNb17-12-2, X10CrNiMoNb18-12, G-X2CrNiMo19-11-2
• AISI: 316L, 316Ti, 316Cb

Technical specifications

Standards

Chemical composition of welding wire %

Mechanical properties

Current type

• AC
• Direct current(+)

Scope of delivery

• Per sturdy plastic tube
• Incl. certificates

Certificate

ELOX R 316L - 3.2×350 mm

Het bericht GeKa ELOX R 316 Laselektrode 3,2×350 mm – 4,5 Kg per koker verscheen eerst op Globe Europe.

Use and functions

• Low-carbon electrode with jacket of rutile. Suitable for welding food tanks, acid, gas, steam and water fittings, stainless steel and other corrosion-resistant materials in the food and chemical industries, among others
• Resistant to corrosion and cracking up to +350 °C
• Welding electrode re-dry at a temperature of: 120-200ºC for 2 hours
• Good welding characteristics, suitable for AC or DC welding

Weldable material classes

• DIN; X2CrNi19-11, X5CrNi18-10, X6CrNiTi18-10, X6CrNib18-10, X2CrNiN18-10, X10CrNiNb18-10, X12CrNi18-8
• AISI; 302, 304, 304L, 304LN, 321, 347,

Technical specifications

Standards

Chemical composition of welding wire %

Mechanical properties

Current type

• AC
• Direct current(+)

Scope of delivery

• Per sturdy plastic tube
• Incl. certificates

Certificate

LOTUS E6013 - 2.5 mm

Het bericht GeKa ELOX R 308L Laselektrode 2,5×250 mm – 3 Kg per koker verscheen eerst op Globe Europe.

Use and functions

• The ELIT welding electrode is easy to weld
• The most common type among rutile electrodes
• Small amounts of splashing and smoking
• Universal welding order, suitable for a wide range of welding tasks
• The ELIT Electrode is thickly coated

Weldable material classes

• S235JR, S275JR, S235J2G3-S355J2G3, S235JRS1 - S235J2S1, S235JRS2 - S235J2S2, S235JRS1 - S235J2S1, S235JRS2 - S235J2S2
• P235GH, P265GH, P255NH, P235T1 - P355T1, P235T2 - P355T2, P235G1TH, P255G1TH
• L210 - L360NB

Technical specifications

Standards

Chemical composition of welding wire %

Mechanical properties

Current type

• AC
• direct current(-)

Scope of delivery

• Per sturdy plastic tube
• Incl. certificates

Certificates

ELIT-E 6013 - 2.5 mm

ELIT-E 6013 - 3.2 mm

Het bericht GeKa ELIT-E 6013 Laselektrode 350 mm – 2,5 Kg per koker verscheen eerst op Globe Europe.

Use and functions

• Suitable for welding in vertical down position
• Electrode coating of flexible type, making the electrode bendable
• Ideal for welding materials in hard-to-reach places
• Commonly used for general applications, such as steel structures
• The LOTUS Electrode is medium-thickly coated

Weldable material classes

• S235JR, S275JR, S235J2G3-S355J2G3, S235JRS1-S235J2S1, S235JRS2-S235J2S2
• P235GH, P255NH, P265GH, P235T1-P355T1, P235T2-P355T2, P235G1TH, P255G1TH
• L210-L360NB

Technical specifications

Standards

Chemical composition of welding wire %

Mechanical properties

Current type

• AC
• direct current(-)

Scope of delivery

• Per sturdy plastic tube
• Incl. certificates

Certificates

LOTUS E6013 - 2.5 mm

LOTUS E6013 - 3.2 mm

Het bericht GeKa LOTUS E6013 Laselektrode 350 mm – 2,5 Kg per Koker verscheen eerst op Globe Europe.

• Tungsten Electrodes are electrodes used during the TIG welding process
• The material tungsten has a high melting point, low electrical resistance and high thermal conductivity
• By adding different metal oxide, the electrodes can be used for different welding results
• TIG welding of ferrous and stainless steels
• Suitable for direct and alternating current
• PLEASE NOTE: Price per box (See second image)

Technical specifications

• Length - 175 mm
• Thickness - 1.6 mm / 2.4 mm / 3.2 mm
• Oxide - 1.40-1.60 % lanthanum oxide
• Colour - Gold

Scope of delivery

• Eggenberg Tungsten electrode Gold - Various sizes

Het bericht Eggenberg Wolfraam elektrode Goud – Diverse maten verscheen eerst op Globe Europe.

• Tungsten Electrodes are electrodes used during the TIG welding process
• The material tungsten has a high melting point, low electrical resistance and high thermal conductivity
• By adding different metal oxide, the electrodes can be used for different welding results
• TIG welding of ferrous steel, stainless steel and aluminium
• Suitable for direct and alternating current
• PLEASE NOTE: Price per box (See second image)

Technical specifications

• Length - 175 mm
• Thickness - 1.6 mm / 2.0 mm / 2.4 mm / 3.2 mm
• Oxide - 1.80-2.20 % cerium oxide
• Colour - Grey

Scope of delivery

• Eggenberg Tungsten electrode Grey - Various sizes

Het bericht Eggenberg Wolfraam elektrode Grijs – Diverse maten verscheen eerst op Globe Europe.