• For unalloyed steel
• Suitable for general use
• The 6013 is a clad welding electrode for general steel structures
• Can be welded in all positions
• Also suitable for vertical and downward positions.

These PATON ANO 36 elite welding electrodes are designed for manual arc welding. The covered electrodes can be used for welding carbon steel structures with carbon content up to 0.25%. According to National Standard 1050- (05kp, 08kp, 08ps, 10pc, 10, 15kp, 15ps, 20kp 20ps, 20) on a short or medium arc in all spatial positions except vertical from top to bottom for PATON ANO 36 electrodes with a diameter of 5 mm.

The electrodes should be stored in a dry room at a temperature of not less than 15°С and a relative humidity of not more than 80%, if the moisture content in the coating exceeds 0.9% of the electrode, and annealed at 110 ± 10° C for 30 minutes before welding. They are not sensitive to the quality of prepared edges, availability of galvanic coatings, rust and other surface contaminants.

PATON ANO 36 elite welding electrodes are characterised by light ignition and re-ignition, stable arc burning, low loss of metal by sputtering, proportional seam of coating, good formation of seam metal, light separability of solidified slag. It allows very low current welding. The manufacturer guarantees that the electrodes meet the requirements of normative documentation. For this it is essential that the conditions of transport, storage and use are observed by the user.

The electrodes contain no harmful substances in the coating. Metal-coated electrode - Cover type - rutile-cellulose.

Advantages

• Using the latest formulas designed together with the specialists of E.O. Paton Electric Welding Institute of the National Academy of Sciences of Ukraine;
• High mechanical properties of the weld ;
• Good slag separation ;
• Comfortable welding process-easy primary and secondary striking, stable arc formation ;
• Increased welder health safety by reducing harmful emissions ;
• High degree of interaction with metals ;
• High performance;
• A wide range allows you to choose the most suitable electrodes for a specific task.

Technical specifications

• Classification
  • ISO 2560-A - E43 3 RC11
  • EN ISO 499 - E42 0 RС11
  • AWS A5.1 - E 6013
• Welding positions - PA, PB, PC, PD, PE, PF
• Chemical composition of the alloy - С ≤ 0.11 S ≤ 0.030 Si ≤0.10 - 0.35 P ≤ 0.035 Mn 0.40-0.65
• Mechanical properties
  
• Yield strength ≥450 N/mm²
  
• Relative elongation ≥ 22%,
  
• Impact resistance ≥ 78 J/cm².
• Welding current - 70 - 110 A
• Number of electrodes in the package - 57 pieces

Scope of delivery

• Paton ANO 36 ELITE welding electrode Ø2.5mm

Het bericht Paton E6013 ANO 36 ELITE Rutiel Laselektrode Ø2.5mm verscheen eerst op Globe Europe.

• For unalloyed steel
• Suitable for general use
• The 6013 is a clad welding electrode for general steel structures
• Can be welded in all positions
• Also suitable for vertical and downward positions.

These welding electrodes 6013 ELITE PATON ANO 21 are intended for manual arc welding. They are adapted for welding carbon steel structures with carbon content up to 0.25%. According to state standard 1050-88 (05kp, 08kp, 08ps, 10kp, 10pc, 15kp, 15ps, 15, 20kp 20ps, 20) on a short or medium arc in all spatial positions. A 5 mm diameter electrode is not recommended to be welded in a vertical position from top to bottom. Welding electrode 6013 ELITE PATON ANO 21 ensures easy arc ignition. They also guarantee good seam formation and easy slag crust separation.

These welding electrodes are recommended for arc welding of butt, lap or critical metal structures, water pipes and low-pressure gas pipes. The manufacturer guarantees that the electrodes meet the requirements of the normative documentation. For this, it is essential that the conditions of transport, storage and use are observed by the user.

Welding conduct direct current any polarity (recommended return "-") on the electrode or varying current from the transformer circuit voltage of at least 50 V. Electrodes should be stored in dry rooms at a temperature not lower than +15 ºС and a relative humidity of not more than 80%. If the moisture content in the coating exceeds 0.9%, it glows at 120 ± 10 °C for 40 minutes.

The electrodes contain no harmful substances in the coating. Metal-coated electrode - Type of coating - rutile.

Advantages

• Using the latest formulas designed together with the specialists of E.O. Paton Electric Welding Institute of the National Academy of Sciences of Ukraine;
• High mechanical properties of the weld ;
• Good slag separation ;
• Comfortable welding process-easy primary and secondary striking, stable arc formation ;
• Increased welder health safety by reducing harmful emissions ;
• High degree of interaction with metals ;
• High performance;
• A wide range allows you to choose the most suitable electrodes for a specific task.

Technical specifications

• Classification
  • EN ISO 2560-А: Е43 2 RС11
  • EN ISO 499: E38 2 R11
  • AWS A5.1: E 6013
• Welding positions
  • PA, PB, PC, PD, PE, PF
• Chemical composition of the alloy - С ≤ 0.10 S ≤ 0.040 Si ≤ 0.30 P ≤ 0.045 Mn 0.50-0.80
• Mechanical properties
  
  • Yield strength - ≥450 N/mm²
    
  • Relative elongation - ≥ 18%,
    
  • Impact resistance - ≥ 78 J/cm².
• Welding current - 90 - 140 A
• Number of electrodes in the package - 35 pieces

Scope of delivery

• Paton E6013 ANO 21 ELITE Rutile Electrodes Ø3.2mm

Het bericht Paton E6013 ANO 21 ELITE Rutiel Elektroden Ø3.2mm verscheen eerst op Globe Europe.

• Tungsten Electrodes are electrodes used during the TIG welding process
• The material tungsten has a high melting point, low electrical resistance and high thermal conductivity
• By adding different metal oxide, the electrodes can be used for different welding results
• TIG welding of ferrous and stainless steels
• Suitable for direct and alternating current
• PLEASE NOTE: Price per box (See second image)

Technical specifications

• Length - 175 mm
• Thickness - 1.6 mm / 2.4 mm / 3.2 mm
• Oxide - 1.40-1.60 % lanthanum oxide
• Colour - Gold

Scope of delivery

• Eggenberg Tungsten electrode Gold - Various sizes

Het bericht Eggenberg Wolfraam elektrode Goud – Diverse maten verscheen eerst op Globe Europe.

• Tungsten Electrodes are electrodes used during the TIG welding process
• The material tungsten has a high melting point, low electrical resistance and high thermal conductivity
• By adding different metal oxide, the electrodes can be used for different welding results
• TIG welding of ferrous steel, stainless steel and aluminium
• Suitable for direct and alternating current
• PLEASE NOTE: Price per box (See second image)

Technical specifications

• Length - 175 mm
• Thickness - 1.6 mm / 2.0 mm / 2.4 mm / 3.2 mm
• Oxide - 1.80-2.20 % cerium oxide
• Colour - Grey

Scope of delivery

• Eggenberg Tungsten electrode Grey - Various sizes

Het bericht Eggenberg Wolfraam elektrode Grijs – Diverse maten verscheen eerst op Globe Europe.

• Tungsten Electrodes are electrodes used during the TIG welding process
• The material tungsten has a high melting point, low electrical resistance and high thermal conductivity
• By adding different metal oxide, the electrodes can be used for different welding results
• TIG welding of aluminium
• Not suitable for DC welding
• PLEASE NOTE: Price per box (See second image)

Technical specifications

• Length - 175 mm
• Thickness - 1.6 mm / 2.0 mm / 2.4 mm / 3.2 mm<
• Colour - Green

Scope of delivery

• Eggenberg Tungsten electrode Green - Various sizes

Het bericht Eggenberg Wolfraam elektrode Groen – Diverse maten verscheen eerst op Globe Europe.

• Tungsten Electrodes are electrodes used during the TIG welding process
• The material tungsten has a high melting point, low electrical resistance and high thermal conductivity
• By adding different metal oxide, the electrodes can be used for different welding results
• TIG welding of stainless steel and ferrous steels
• Non-radioactive
• Suitable for direct and alternating current
• PLEASE NOTE: Price per box (See second image)

Technical specifications

• Length - 175 mm
• Thickness - 1.6 mm / 2.4 mm / 3.2 mm
• Oxide - Rare earth metals, mixed oxide
• Colour - Rose

Scope of delivery

• Eggenberg Tungsten Electrode Rose - Various sizes

Het bericht Eggenberg Wolfraam elektrode Rose – Diverse maten verscheen eerst op Globe Europe.

• Tungsten Electrodes are electrodes used during the TIG welding process
• The material tungsten has a high melting point, low electrical resistance and high thermal conductivity
• By adding different metal oxide, the electrodes can be used for different welding results
• TIG welding of ferrous steel, stainless steel and aluminium
• Suitable for direct and alternating current
• Non-radioactive
• PLEASE NOTE: Price per box (See second image)

Technical specifications

• Length - 175 mm
• Thickness - 1.6 mm / 2.4 mm / 3.2 mm
• Oxide - Rare earth metals, mixed oxide
• Colour - Turquoise

Scope of delivery

• Eggenberg Tungsten electrode Turquoise - Various sizes

Het bericht Eggenberg Wolfraam elektrode Turquoise – Diverse maten verscheen eerst op Globe Europe.