Paton E6013 ANO 21 ELITE Rutile Electrodes Ø3.2mm

Features Paton E6013 ELITE Rutile Electrodes Ø3.2mm

• For unalloyed steel
• Suitable for general use
• The 6013 is a clad welding electrode for general steel structures
• Can be welded in all positions
• Also suitable for vertical and downward positions.

These welding electrodes 6013 ELITE PATON ANO 21 are intended for manual arc welding. They are adapted for welding carbon steel structures with carbon content up to 0.25%. According to state standard 1050-88 (05kp, 08kp, 08ps, 10kp, 10pc, 15kp, 15ps, 15, 20kp 20ps, 20) on a short or medium arc in all spatial positions. A 5 mm diameter electrode is not recommended to be welded in a vertical position from top to bottom. Welding electrode 6013 ELITE PATON ANO 21 ensures easy arc ignition. They also guarantee good seam formation and easy slag crust separation.

These welding electrodes are recommended for arc welding of butt, lap or critical metal structures, water pipes and low-pressure gas pipes. The manufacturer guarantees that the electrodes meet the requirements of the normative documentation. For this, it is essential that the conditions of transport, storage and use are observed by the user.

Welding conduct direct current any polarity (recommended return "-") on the electrode or varying current from the transformer circuit voltage of at least 50 V. Electrodes should be stored in dry rooms at a temperature not lower than +15 ºС and a relative humidity of not more than 80%. If the moisture content in the coating exceeds 0.9%, it glows at 120 ± 10 °C for 40 minutes.

The electrodes contain no harmful substances in the coating. Metal-coated electrode - Type of coating - rutile.

Advantages

• Using the latest formulas designed together with the specialists of E.O. Paton Electric Welding Institute of the National Academy of Sciences of Ukraine;
• High mechanical properties of the weld ;
• Good slag separation ;
• Comfortable welding process-easy primary and secondary striking, stable arc formation ;
• Increased welder health safety by reducing harmful emissions ;
• High degree of interaction with metals ;
• High performance;
• A wide range allows you to choose the most suitable electrodes for a specific task.

Technical specifications

• Classification
  • EN ISO 2560-А: Е43 2 RС11
  • EN ISO 499: E38 2 R11
  • AWS A5.1: E 6013
• Welding positions
  • PA, PB, PC, PD, PE, PF
• Chemical composition of the alloy - С ≤ 0.10 S ≤ 0.040 Si ≤ 0.30 P ≤ 0.045 Mn 0.50-0.80
• Mechanical properties
  
  • Yield strength - ≥450 N/mm²
    
  • Relative elongation - ≥ 18%,
    
  • Impact resistance - ≥ 78 J/cm².
• Welding current - 90 - 140 A
• Number of electrodes in the package - 35 pieces

Scope of delivery

• Paton E6013 ANO 21 ELITE Rutile Electrodes Ø3.2mm